How to Badge on the Taqt One?

How to Badge on the Taqt One?

In order to preserve battery life, the NFC badge reader on the Taqt One is not constantly scanning for badges. Therefore, it is necessary to press a button to activate the badge reading.
This button to activate NFC can be:
  1. The one at the bottom left (in the case of standard clocking), or
  2. One of the 5 main buttons (for targeted clocking).
Notes
The NFC activation lasts for 5 seconds. During this time, a red LED flashes at the top right of the terminal, and any action other than badging will not be recognized by the terminal.

Standard Clocking

Standard Clocking

After badging, the date and time of the clocking will be displayed on the screen:

Time and Date display on the screen

Targeted Clocking

After badging, the type of action corresponding to the button pressed (Entry/Exit/Cleaning, etc.) along with the date and time of the clocking will be displayed on the screen.
​
Targeted Clocking

    Try Ubiqod


    Get 100 free credits to start building with Ubiqod: sign up here

      • Related Articles

      • How to Restart the Taqt One Device?

        It may be necessary to restart your Taqt One terminal in certain cases: Configuration update (front panel change) Terminal disconnected Time synchronization Screen freeze Moving the terminal To do this, place the magnetic badge on the right side of ...

      • Why is the LED blinking at the top right of the Taqt One?

        The Taqt One includes an LED located in the upper right corner of its front panel. It displays two colors: green and red. This LED is used to indicate several things: Connectivity status when sending a message NFC activation Terminal firmware update ...

      • How To Use the Taqt One Buttons?

        Number of buttons The TaqtOne device features up to **5 configurable buttons**. They can be activated or deactivated remotely, requiring only a simple change of the front panel to match the selected configuration. Standard use cases: No buttons ...

      • TaqtOne Device : User Manual

        Check the TaqtOne User Manual : Set Up & Maintenance ➡️ Check the user manual for the Taqt One terminal by visiting here.

      • TaqtOne Buttons: Modes and Settings

        Here we will describe how to use and configure the buttons on a TaqtOne device (whether capacitive or touch-less) for a check-in experience that fits the operational needs. Overview Each TaqtOne can be composed with up to 5 configurable buttons. ...