How To Use the Taqt One Buttons?

How To Use the Taqt One Buttons?

Number of buttons

The TaqtOne device features up to **5 configurable buttons**. They can be activated or deactivated remotely, requiring only a simple change of the front panel to match the selected configuration.

Standard use cases:
  1. No buttons (simple check-in)
  2. 2 buttons (in-out)
  3. 3 buttons (smileys, interventions)

Contactless Mode

The buttons can operate in the following modes:
  1. "Capacitive", requiring physical touch
  2. "No touch", functioning without contact

Contactless mode is available only for configurations with 1, 2, or 3 buttons. For 4 or more buttons, the system switches to “capacitive” mode to avoid unintentional presses.

Acknowledgment of Presses - Delay Setting

By default, there is a **3-second delay** between each button press to prevent accidental activations. During this time, no additional inputs are registered. This delay can be shortened or extended based on your needs.

To adjust the settings of your TaqtOne, you can open a ticket.

    Try Ubiqod


    Get 100 free credits to start building with Ubiqod: sign up here

      • Related Articles

      • How to Badge on the Taqt One?

        In order to preserve battery life, the NFC badge reader on the Taqt One is not constantly scanning for badges. Therefore, it is necessary to press a button to activate the badge reading. This button to activate NFC can be: The one at the bottom left ...

      • TaqtOne Buttons: Modes and Settings

        Here we will describe how to use and configure the buttons on a TaqtOne device (whether capacitive or touch-less) for a check-in experience that fits the operational needs. Overview Each TaqtOne can be composed with up to 5 configurable buttons. ...

      • How to Restart the Taqt One Device?

        It may be necessary to restart your Taqt One terminal in certain cases: Configuration update (front panel change) Terminal disconnected Time synchronization Screen freeze Moving the terminal To do this, place the magnetic badge on the right side of ...

      • Why is the LED blinking at the top right of the Taqt One?

        The Taqt One includes an LED located in the upper right corner of its front panel. It displays two colors: green and red. This LED is used to indicate several things: Connectivity status when sending a message NFC activation Terminal firmware update ...

      • TaqtOne Device : User Manual

        Check the TaqtOne User Manual : Set Up & Maintenance ➡️ Check the user manual for the Taqt One terminal by visiting here.