How to replace the batteries in a TaqtOne ?
Replacing the batteries in a TaqtOne is a quick and essential task to ensure your device continues functioning properly over time.
Follow the steps below to do it safely and without damaging the device.
🔋 What type of Batteries I need to use?
The TaqtOne runs on 6 AA 1.5V Energizer Ultimate Lithium batteries (L91), specifically recommended for their long lifespan and reliability, even in harsh environments.
Example :
Do not use standard alkaline, rechargeable, or non-recommended brands of batteries.This can cause malfunctions, reduce battery life or damage the device.
🧰 Steps to replace the batteries
1. Gather the tools required
1 Allen key
6 new Energizer Ultimate Lithium AA batteries 1.5
1 clean and dry cloth (optional)
2. Remove the front panel
Use the Allen key to unscrew the small screw at the bottom of the TaqtOne.
Then insert the same Allen key into the slot above the screw to smoothly lever and remove the front panel.
3. Insert the new batteries
Remove the old batteries and note their orientation.
Insert the 6 new batteries, following the + / - polarity indicators.
Make sure the batteries are properly fitted and that no contact points are damaged or oxidized.
4. Close the device
Reattach the front panel and tighten the screw at the bottom.
Press along the edges to ensure the panel is securely fitted into the casing.
✅ After replacement: What to check ?
The screen should refresh.
A LED should blink in the top-right corner (depending on connection status).
If nothing happens, restart the device using the magnet provided.
(See the article: How to restart or reset your TaqtOne.)
🧠 Best Practices
Always keep spare batteries on hand for your most active locations.
Use the Data menu on the Taqt portal to monitor battery levels and anticipate replacements.
📎 Useful Links
❓ Need Help?
If your device does not restart after changing the batteries, or if you're unsure of any step:
📧 support@taqt.com
📞 +33 (0)1 80 91 98 67