How to restart a TaqtOne device?
It may be necessary to restart a TaqtOne device in certain cases:
- Configuration update (front panel change)
- Devis shows as disconnected
- Time synchronization
- Screen frozen
- Moving one device
To do this, place the magnet on the right side of the device, at the upper part of the device and move it back and forth vertically.
An LED in the top right corner will blink, and the screen will refresh. The device will restart while performing a connectivity test.
Refer to the TaqtOne user manual to carry out the test and verify that the restart was successful.
Try Ubiqod
Get 100 free credits to start building with Ubiqod: sign up here
Related Articles
Why is my TaqtOne no longer sending data?
If your TaqtOne device no longer sends data to the dashboard, the issue may stem from technical or logistical causes. This guide will help you identify the source of the issue and restore proper operation. ? 1. The device has no battery power ...What to do if your TaqtOne is disconnected ?
When a TaqtOne appears as “Disconnected” on app.taqt.com, it means the device is no longer sending data to the portal. This status can be explained by anything from low batteries to poor network coverage. Follow this step-by-step guide to identify ...How to replace the batteries in a TaqtOne ?
Replacing the batteries in a TaqtOne is a quick and essential task to ensure your device continues functioning properly over time. Follow the steps below to do it safely and without damaging the device. ? What type of Batteries I need to use? The ...What do the different TaqtOne statuses mean on the dashboard?
On the portal app.taqt.com, each TaqtOne device is assigned a status that reflects its current operational state. These statuses help users monitor their devices in real time, quickly detect anomalies and simplify maintenance and field interventions. ...My staff check on the device but I can't see the data, what should I do?
If your staff check on a TaqtOne but it doesn't appear on the dashboard, several reasons may explain the missing data. Here are the most common explanations and the steps you should take to sort it out. 1. ? The NFC tag used is not recognized by the ...