Some connectors allow you to select which data will be sent and to which location. For example, the Google Sheets connector enables assigning each column to a specific data field.
Content: The name of the account to which the tracker belongs.
Value: 1 if a badge was swiped simultaneously with the action (or if a badge was swiped without any action). Otherwise, the value is 0.
Content: The label of the code entered by the user. For example, the name associated with a badge or a PIN code.
Content: The raw code as entered by the user, whether through manual entry or a badge swipe.
Value: 1 if the PIN code (manual entry or QR code, BLE, or RFID badge) matches a valid value present in the list of PIN codes or badges associated with the tracker interface. Otherwise, the value is 0.
Content: If provided in the site settings, this field contains the email of the client associated with the site.
Content: If provided in the site settings, this field contains the phone number of the client associated with the site.
Content: The label of the data entered by the user. For example, the label of the button pressed by the user.
Content: Configured in the interface, this numerical value identifies a piece of data independently of the label presented to the user.
Content: For feedback-type interfaces, this field contains the user's email address if provided.
Content: For a feedback-type tracker, this field contains any comments made by the user.
Content: For a feedback-type tracker, this field contains the overall satisfaction rating left by the user.
Possible Values: "BUTTON_SINGLE", "BUTTON_MULTIPLE", "DIGIT", "FEEDBACK", "SMILIO_A", "SMILIO_S", "SMILIO_E", "CLOCK_ST", "CLOCK_R", "CLOCK_S".
Content: If provided in the site settings, this field contains the email of the manager associated with the site.
Content: If provided in the site settings, this field contains the phone number of the manager associated with the site.
Value: 1 if the user is located within the defined perimeter of a site. Otherwise, the value is 0.
Content: If the user takes a photo (e.g., to illustrate an incident), this field contains the photo in JPEG format, encoded in Base64.
Value: 1 if the PIN code (manual entry or QR code badge) was sent from a cookie stored on the user's smartphone. This occurs when the "remember the code" function is activated in the interface, and the user did not need to re-enter their code or re-present their QR code badge. Otherwise, the value is 0.
Value: 1 if the user scanned an Ubiqod Key and the QR code is validated. Otherwise, the value is 0.
Content: The unique identifier of a site, assigned by Ubiqod during site creation and cannot be modified. To associate a site ID corresponding to your own system, use external references.
Content: The label of the site entered by the user. For example: Taqt Company Headquarters.
Content: If provided, this field sends the GPS location of the site associated with the tracker.
Content: The slug of the tracker is a unique identification number. For a connected object (IoT) or an Ubiqod Key, it corresponds to the serial number indicated on the device's label. For a QR code, the slug is used in the URL associated with the tracker.
Content: The date and time when the data was submitted by the user (format: 2022-04-15T06:44:19.472Z).
Content: The unique identifier of a tracker, assigned by Ubiqod during tracker creation and cannot be modified.
Content: The label of the tracker entered by the user. For example: Cleaning checkpoint QR code for floor 1.
Possible Values: "SMILIO_A", "SMILIO_S", "SMILIO_E", "CLOCK_ST", "CLOCK_R", "CLOCK_S".
Content: If activated (and the user has authorized access to their position), this field returns the user's GPS position. For IoT devices, this value returns the site's location.